How to Write the Professional Practitioner 3 Fitness Testing Report (DkIT)
The Professional Practitioner 3 fitness testing report is marked on your reasoning, not on how well you can copy a test protocol. Pick three tests that clearly match your subject’s sport, spend roughly 500 words justifying each one on suitability, reliability, validity and practicality, compare each with an alternative measure, and move every set-up step into the appendices. If you would like a second opinion on your structure, our report writing help page explains how we support practical assessment write-ups.
What the brief is really asking
The Professional Practitioner 3 lab and field testing brief at DkIT has two parts. In the practical part you carry out a case study on a subject or partner, run a range of lab and field fitness tests safely, and record the results on a raw data sheet and a spreadsheet. In the written part you produce a 2,000-word report (plus or minus 10%) that uses published literature to discuss how you selected and administered at least three different tests.
The report is worth 40% of the module and is referenced in DkIT Harvard. Inside those 2,000 words the brief expects five things: a short subject overview (age, gender, height, weight and sport), a justification of each test, a critical comparison with other measures, results in tables and figures, and recommendations for future training. Consent forms, the PAR-Q and programming material belong in the appendices.
The phrase that decides your grade is “justify the selection”. A report that explains what each test is will sit in the middle bands. A report that explains why each test suits this subject, how trustworthy it is and what the alternative would have been moves into the upper bands.
How to split 2,000 words
| Section | Suggested words | What it must do |
|---|---|---|
| Introduction | 120–150 | Explain why testing matters for the sport and state the battery you chose |
| Subject overview | 60–80 (plus a small table) | Age, gender, height, weight, sport, position and screening outcome |
| Test 1, Test 2, Test 3 | about 500 each | Suitability, reliability, validity, practicality, comparison with an alternative |
| Results | 100–150 (plus table and figure) | Present scores and compare them with a named normative source |
| Recommendations and conclusion | 150–200 | Turn each result into a specific training priority |
Keep the protocol descriptions out of those 500-word blocks. One sentence such as “the full protocol is in Appendix C” is enough. The brief already points supporting material such as consent, PAR-Q and programming to the appendices, and every word spent on cone distances is a word not spent on evaluation.
Choosing your three tests
Start from the sport, not from the tests you already know. Write down the two or three physical qualities that most affect performance in your subject’s sport and position, then choose one test per quality. The brief lists body composition, aerobic endurance, strength, speed, power, agility and flexibility as options, so you have room to make a defensible choice.
| Sport type | Qualities to prioritise | Example field tests | Lab alternatives to compare with |
|---|---|---|---|
| Soccer, GAA, rugby, hockey | Intermittent aerobic endurance, speed, power | Yo-Yo IR1, 20 m sprint, standing long jump | Treadmill VO2max, timing gates vs laser, force-plate jumps |
| Distance running, cycling | Aerobic endurance, body composition | Cooper 12-minute run, skinfolds | VO2max with gas analysis, DXA or bioimpedance |
| Court sports | Agility, power, speed | T-test or 505, vertical jump, 10 m sprint | Contact mats or force plates, timing gates |
| Strength sports | Maximal strength, power | Handgrip, push-up test, medicine-ball throw | 1RM testing, isokinetic dynamometry |
For a soccer player, a battery such as the push-up test (muscular endurance), the Yo-Yo Intermittent Recovery Test Level 1 (aerobic) and either a 20 m sprint (speed) or a standing long jump (power) works well. Our Professional Practitioner 3 fitness testing sample shows that battery written up, for reference only.
How to write each 500-word test section
Use the same five-part structure for every test so the marker can see you have covered each criterion.
- Suitability. Link the test to a specific demand of the sport and position. “Midfielders repeat high-intensity runs with short recoveries” is stronger than “soccer needs fitness”.
- Reliability. Explain how consistent the test is and what threatens that consistency, such as tester judgement, surface, footwear, timing method or motivation.
- Validity. Say what the test actually measures and how well it relates to performance. Use published studies rather than general statements.
- Practicality. Cover equipment, cost, time, space, number of athletes tested at once and safety.
- Comparison. Name a comparable measure, often a laboratory test, and explain why you chose the field test instead, or when the lab test would be better.
End each section with one sentence on how you controlled the main threat to reliability in your own session, for example using one tester for every push-up count or a fixed start distance behind the first timing gate.
Reliability, validity and practicality made simple
These three words appear in almost every rubric for this kind of report, and students often blur them.
| Term | Plain meaning | What to write about |
|---|---|---|
| Reliability | Would the subject get the same score if nothing had changed? | Test–retest consistency, typical error, standardisation steps |
| Validity | Does the test measure the quality you claim it measures? | Links to lab measures and to match or competition performance |
| Practicality | Can a coach realistically use it? | Cost, equipment, time, group testing, safety and skill needed |
A useful idea from sports science is that a test is only helpful if its measurement error is smaller than the change you want to detect. If a sprint time can vary by a tenth of a second because of hand timing, a 0.05-second “improvement” tells you nothing. Writing one or two sentences on this point shows the marker you understand testing beyond the textbook.
Safety, screening and test order
The brief asks you to administer tests “safely and effectively”, so show that you thought about safety before the first test. Mention pre-participation screening with a PAR-Q, informed consent, a standardised warm-up and the order of testing. A common approach is to run the least fatiguing tests first and the most demanding test last, so sprint or jump tests come before a maximal aerobic test such as the Yo-Yo. Put the completed forms in the appendices and refer to them in the text.
Presenting your results
The brief allows the results to come from your practical session, and they belong in a clear table with the test, the component, the score and a comparison point. Add one figure, such as a bar chart against norms or a simple profile chart, and refer to it in the text. Always name the normative source you compared against, and note when the norms were collected with a different protocol or population. A score is only meaningful once it is placed next to something.
Recommendations that earn marks
Recommendations should follow directly from the results, one per test at least. If aerobic performance is below the comparison values, suggest specific intermittent running work and how often. If speed is strong, suggest how to maintain it. Finish with a retest plan: the same tests, in the same order and conditions, after six to eight weeks. This shows you see testing as an ongoing process that guides training.
Common mistakes
- Describing protocols in the main text. Move them to the appendices and use the words for justification.
- Choosing tests that do not fit the sport. A continuous 12-minute run is hard to defend for a stop-start team sport.
- No alternative measure. Every test section needs a comparison, or the critical discussion criterion is missed.
- Generic evidence. “This test is reliable” with no source will not score. Use studies on the specific test.
- Results with no comparison. Raw numbers without norms or squad data cannot be interpreted.
- Recommendations that ignore the results. Generic training advice reads as padding.
- Harvard slips. Check that every in-text citation matches the reference list in DkIT Harvard format.
Checklist before you submit
- Subject overview with age, gender, height, weight and sport
- At least three tests, each linked to a demand of the sport
- Suitability, reliability, validity and practicality covered for every test
- A comparable measure discussed for every test
- Protocols, PAR-Q and consent in the appendices
- Results table and at least one figure, with named norms
- Recommendations that follow from each result, plus a retest plan
- Word count between 1,800 and 2,200
- DkIT Harvard citations and reference list matching exactly
- Submitted through Moodle before the deadline, with the receipt checked
For another DkIT practical brief in sport, see the SMCOH3023 sports performance analysis brief.
FAQs
How many fitness tests do I need?
At least three different tests. With about 500 words per test, three is usually the right number for a 2,000-word report.
Should I explain how each test is set up?
Only briefly. Put the full protocol in the appendices and use the main text to justify why the test suits your subject.
Can I use field tests only, or do I need a lab test?
The brief refers to lab and field tests. Field tests are acceptable, but compare each one with a laboratory alternative in your discussion.
Where should the PAR-Q and consent form go?
In the appendices. Refer to them in your subject overview or safety section so the marker knows screening was done.
What counts as a comparable measure?
Any test that measures the same quality in a different way, for example a treadmill VO2max test compared with the Yo-Yo test, or a 1RM bench press compared with the push-up test.
Does the word count include the appendices and references?
Check your module page, but appendices and the reference list are normally excluded. Keep the main report within 2,000 words plus or minus 10%.
Want feedback on your test choices or a structural review before you submit? Send us your assignment details for a quote, or read more on our university assignment help page.

Written by
Ireland Assignment Helper Editorial Team
Our editorial team works with students in Ireland and sees the questions they ask most often. This guide is built from those real queries: where students get stuck, what markers look for and how to plan the work step by step.